| pProfileName |
- One or more bytes describing the profile
|
| pProfilenameSize; |
- This parameter is an input parameter and should be initialised to the size of pProfileName field. Size of this parameter is 2 bytes.
|
| pPDPType |
- Packet Data Protocol (PDP) type specifies the type of data payload exchanged over the air link when the packet data session is established with this profile
- 0x00 - PDP-IP (IPv4)
- 0x01 - PDP-PPP
- 0x02 - PDP-IPV6
- 0x03 - PDP-IPV4V6
|
| pPdpHdrCompType |
- PDP header compression type
- 0 - PDP header compression is OFF
- 1 - Manufacturer preferred compression
- 2 - PDP header compression based on RFC 1144
- 3 - PDP header compression based on RFC 25074 PDP header compression based on RFC 3095
|
| pPdpDataCompType |
- PDP data compression type
- 0 - PDP data compression is OFF
- 1 - Manufacturer preferred compression
- 2 - V.42BIS data compression
- 3 - V.44 data compression
|
| pAPNName |
|
| pAPNnameSize; |
- This parameter is an input parameter and should be initialised to the size of pAPNName field. Size of this parameter is 2 bytes.
|
| pPriDNSIPv4AddPref |
- Primary DNS IPv4 Address Preference
|
| pSecDNSIPv4AddPref |
- Secondary DNS IPv4 Address Preference
|
| pUMTSReqQoS |
|
| pUMTSMinQoS |
|
| pGPRSRequestedQoS |
|
| pUsername |
|
| pUsernameSize; |
- This parameter is an input parameter and should be initialised to the size of pUsername field. Size of this parameter is 2 bytes.
|
| pPassword |
|
| pPasswordSize; |
- This parameter is an input parameter and should be initialised to the size of pPassword field. Size of this parameter is 2 bytes.
|
| pAuthenticationPref |
- Authentication Preference
- Bit map that indicates the authentication algorithm preference
- Bit 0 - PAP preference
- 0 - PAP is never performed
- 1 - PAP may be performed
- Bit 1 - CHAP preference
- 0 - CHAP is never performed
- 1 - CHAP may be performed
- If more than one bit is set, then the device decides which authentication procedure is performed while setting up the data session. For example, the device may have a policy to select the most secure authentication mechanism.
|
| pIPv4AddrPref |
|
| pPcscfAddrUsingPCO |
- P-CSCF Address using PCO Flag
- 1 - (TRUE) implies request PCSCF address using PCO
- 0 - (FALSE) implies do not request By default, this value is 0
|
| pPdpAccessConFlag |
- PDP access control flag
- 0 - PDP access control none
- 1 - PDP access control reject
- 2 - PDP access control permission
|
| pPcscfAddrUsingDhcp |
- P-CSCF address using DHCP
- 1 - (TRUE) implies Request PCSCF address using DHCP
- 0 - (FALSE) implies do not request By default, value is 0
|
| pImCnFlag |
- IM CN flag
- 1 - (TRUE) implies request IM CN flag for this profile
- 0 - (FALSE) implies do not request IM CN flag for this profile
|
| pTFTID1Params |
|
| pTFTID2Params |
|
| pPdpContext |
|
| pSecondaryFlag |
- PDP context secondary flag
- 1 - (TRUE) implies this is secondary profile
- 0 - (FALSE) implies this is not secondary profile
|
| pPrimaryID |
- PDP context primary ID
- function SLQSGetProfileSettings() returns a default value 0xFF if this parameter is not returned by the device
|
| pIPv6AddPref |
- IPv6 address preference Preferred IPv6 address to be assigned to the TE; actual assigned address is negotiated with the network and may differ from this value; if not specified, the IPv6 address is obtained automatically from the network
|
| pUMTSReqQoSSigInd |
- UMTS requested QoS with Signalling Indication flag
|
| pUMTSMinQoSSigInd |
- UMTS minimum QoS with Signalling Indication flag
|
| pPrimaryDNSIPv6addpref |
- Primary DNS IPv6 address preference
- The value may be used as a preference during negotiation with the network; if not specified, the wireless device will attempt to obtain the DNS address automatically from the network; the negotiated value is provided to the host via DHCP
|
| pSecondaryDNSIPv6addpref |
- Secondary DNS IPv6 address preference
|
| paddrAllocationPref |
- DHCP/NAS preference
- This enumerated value may be used to indicate the address allocation preference
- 0 - NAS signaling is used for address allocation
- 1 - DHCP is used for address allocation
|
| pQosClassID |
|
| pAPNDisabledFlag |
- Optional 1 Byte Flag indicating if the APN is disabled/enabled
- If set, the profile can not be used for making data calls
- Any data call is failed locally
- Values:
- 0 - FALSE(default)
- 1 - True
- This parameter is currently read only and can be read by using the function SLQSGetProfileSettings().
|
| pPDNInactivTimeout |
- Optional 4 Bytes indicating the duration of inactivity timer in seconds
- If the PDP context/PDN connection is inactive for this duration i.e. No data Tx/Rx occurs, the PDP context/PDN connection is disconnected
- Default value of zero indicates infinite value
- This parameter is currently read only and can be read by using the function SLQSGetProfileSettings().
|
| pAPNClass |
- Optional 1 Byte numeric identifier representing the APN in profile
- Can be set and queried but is not used by the modem
- This parameter is currently read only and can be read by using the function SLQSGetProfileSettings().
|
