appStatus Struct Reference

Data Fields
BYTE	appType
BYTE	appState
BYTE	persoState
BYTE	persoFeature
BYTE	persoRetries
BYTE	persoUnblockRetries
BYTE	aidLength
BYTE	aidVal [MAX_DESCRIPTION_LENGTH]
BYTE	univPin
BYTE	pin1State
BYTE	pin1Retries
BYTE	puk1Retries
BYTE	pin2State
BYTE	pin2Retries
BYTE	puk2Retries

Detailed Description

This structure contains Application Status Information loaded on the card.

Parameters:

	appType	Indicates the type of the application. 0 - Unknown 1 - SIM card 2 - USIM application 3 - RUIM card 4 - CSIM application 5 - ISIM application Other values are reserved for the future and are to be handled as "Unknown".
	appState	Indicates the state of the application. 0 - Unknown 1 - Detected 2 - PIN1 or UPIN is required 3 - PUK1 or PUK for UPIN is required 4 - Personalization state must be checked 5 - PIN1 is blocked 6 - Illegal 7 - Ready
	persoState	Indicates the state of the personalization for the application. 0 - Unknown 1 - Personalization operation is in progress 2 - Ready 3 - Personalization code is required 4 - PUK for personalization code is required 5 - Permanently blocked
	persoFeature	Indicates the personalization feature. This applies only when a personalization code is required to deactivate or unblock personalization. 0 - GW network personalization 1 - GW network subset personalization 2 - GW service provider personalization 3 - GW corporate personalization 4 - GW UIM personalization 5 - 1X network type 1 personalization 6 - 1X network type 2 personalization 7 - 1X HRPD personalization 8 - 1X service provider personalization 9 - 1X corporate personalization 10 - 1X RUIM personalization 11 - Unknown
	persoRetries	Indicates the number of retries remaining to disable the personalization.
	persoUnblockRetries	Indicates the number of retries remaining to unblock the personalization.
	aidLength	Number of sets of the following elements. i.e. aidVal If zero(0) then no aidVal information exists.
	aidVal[MAX_DESCRIPTION_LENGTH]	Application identifier value.
	univPin	Indicates whether UPIN replaces PIN1. 0 - PIN1 is used 1 - UPIN replaces PIN1
	pin1State	Indicates the state of PIN1. 0 - Unknown 1 - Enabled and not verified 2 - Enabled and verified 3 - Disabled 4 - Blocked 5 - Permanently blocked
	pin1Retries	Indicates the number of retries remaining to verify PIN1.
	puk1Retries	Indicates the number of retries remaining to unblock PIN1.
	pin2State	Indicates the state of PIN2. 0 - Unknown 1 - Enabled and not verified 2 - Enabled and verified 3 - Disabled 4 - Blocked 5 - Permanently blocked
	pin2Retries	Indicates the number of retries remaining to verify PIN2.
	puk2Retries	Indicates the number of retries remaining to unblock PIN2.