| pEmerMode |
- Optional parameter specifying the emergency Mode
- Values:
- 0 - OFF (normal)
- 1 - ON (Emergency)
|
| pModePref |
- Optional parameter
- Bit Mask indicating the radio technology mode preference
- Bit values:
- Bit 0 - cdma2000 1x
- Bit 1 - cdma2000 HRPD(1xEV-DO)
- Bit 2 - GSM
- Bit 3 - UMTS
- Bit 4 - LTE
|
| pBandPref |
- Optional parameter
- Bit mask representing the band preference
- Bit values:
- Bit 0 - Band Class 0, A-System
- Bit 1 - Band Class 0, B-System, Band Class 0 AB, GSM 850 Band
- Bit 2 - Band Class 1, all blocks
- Bit 3 - Band Class 2 place holder
- Bit 4 - Band Class 3, A-System
- Bit 5 - Band Class 4, all blocks
- Bit 6 - Band Class 5, all blocks
- Bit 7 - GSM_DCS_1800 band
- Bit 8 - GSM Extended GSM (E-GSM) 900 band
- Bit 9 - GSM Primary GSM (P-GSM) 900 band
- Bit 10 - Band Class 6
- Bit 11 - Band Class 7
- Bit 12 - Band Class 8
- Bit 13 - Band Class 9
- Bit 14 - Band Class 10
- Bit 15 - Band Class 11
- Bit 16 - GSM 450 band
- Bit 17 - GSM 480 band
- Bit 18 - GSM 750 band
- Bit 19 - GSM 850 band
- Bit 20 - GSM Railways GSM 900 Band
- Bit 21 - GSM PCS 1900 band
- Bit 22 - WCDMA Europe, Japan, and China IMT 2100 band
- Bit 23 - WCDMA U.S. PCS 1900 band
- Bit 24 - WCDMA Europe and China DCS 1800 band
- Bit 25 - WCDMA U.S. 1700 band
- Bit 26 - WCDMA U.S. 850 band
- Bit 27 - WCDMA Japan 800 band
- Bit 28 - Band Class 12
- Bit 29 - Band Class 14
- Bit 30 - Reserved
- Bit 31 - Band Class 15
- Bit 32 to 47 - Reserved
- Bit 48 - WCDMA Europe 2600 band
- Bit 49 - WCDMA Europe and Japan 900 band
- Bit 50 - WCDMA Japan 1700 band
- Bit 51 to 55 - Reserved
- Bit 56 - Band Class 16
- Bit 57 - Band Class 17
- Bit 58 - Band Class 18
- Bit 59 - Band Class 19
- Bit 60 to 64 - Reserved
|
| pPRLPref |
- Optional parameter indicating the CDMA PRL Preference
- Values:
- 0x0001 - Acquire available system only on the A side
- 0x0002 - Acquire available system only on the B side
- 0x3FFF - Acquire any available systems
|
| pRoamPref |
- Optional parameter indicating the roaming Preference
- Values:
- 0x01 - Acquire only systems for which the roaming indicator is off
- 0x02 - Acquire a system as long as its roaming indicator is not off
- 0x03 - Acquire only systems for which the roaming indicator is off or solid on, i.e. not flashing; CDMA only
- 0xFF - Acquire systems, regardless of their roaming indicator
|
| pLTEBandPref |
- Optional parameter
- Bit mask representing the LTE band preference
- Bit Values
- Bit 0 - E-UTRA Operating Band 1
- Bit 1 - E-UTRA Operating Band 2
- Bit 2 - E-UTRA Operating Band 3
- Bit 3 - E-UTRA Operating Band 4
- Bit 4 - E-UTRA Operating Band 5
- Bit 5 - E-UTRA Operating Band 6
- Bit 6 - E-UTRA Operating Band 7
- Bit 7 - E-UTRA Operating Band 8
- Bit 8 - E-UTRA Operating Band 9
- Bit 9 - E-UTRA Operating Band 10
- Bit 10 - E-UTRA Operating Band 11
- Bit 11 - E-UTRA Operating Band 12
- Bit 12 - E-UTRA Operating Band 13
- Bit 13 - E-UTRA Operating Band 14
- Bit 16 - E-UTRA Operating Band 17
- Bit 17 - E-UTRA Operating Band 18
- Bit 18 - E-UTRA Operating Band 19
- Bit 19 - E-UTRA Operating Band 20
- Bit 20 - E-UTRA Operating Band 21
- Bit 32 - E-UTRA Operating Band 33
- Bit 33 - E-UTRA Operating Band 34
- Bit 34 - E-UTRA Operating Band 35
- Bit 35 - E-UTRA Operating Band 36
- Bit 36 - E-UTRA Operating Band 37
- Bit 37 - E-UTRA Operating Band 38
- Bit 38 - E-UTRA Operating Band 39
- Bit 39 - E-UTRA Operating Band 40
- All other bits are reserved
|
| pNetSelPref | - netSelectionPref
- Optional parameter for specifying Network Selection Preference
- Modem selects networks based on this parameter(if present).
- see netSelectionPref for more information
|
| pChgDuration |
- Optional parameter specifying the duration of the change
- Values:
- 0x00 - Power cycle - Remains active until the next device power cycle
- 0x01 - Permanent - Remains active through power cycles until changed by client
- Device will use "0x01 - permanent" as default if this parameter is omitted
|
| pMNCIncPCSDigStat |
- Optional parameter indicating if MNC includes PCS digit
- Values:
- TRUE - MNC is a 3 digit value; e.g., a reported value of 90 corresponds to an MNC value of 090
- FALSE - MNC is a 2-digit value; e.g., a reported value of 90 corresponds to an MNC value of 90
|
| pSrvDomainPref |
- Optional parameter indicating Service domain preference
- Values:
- 0x00 - Circuit switched only
- 0x01 - Packet switched only
- 0x02 - Circuit switched and packet switched
- 0x03 - Packet switched attach
- 0x04 - Packet switched detach
|
| pGWAcqOrderPref |
- Optional parameter indicating GSM/WCDMA Acquisition order Preference
- Values:
- 0x00 - Automatic
- 0x01 - GSM then WCDMA
- 0x02 - WCDMA then GSM
|