qaGobiApiTableVoiceCallEndReasons.h File Reference

Voice Service Call and supplementary services end reasons. More...

Go to the source code of this file.

Detailed Description

Voice Service Call and supplementary services end reasons.

Voice Call and supplementary services end reason codes (Code - Reason)

General

0 - Phone is offline
20 - Phone is CDMA locked until a power cycle; CDMA only
21 - Phone has no service
22 - Call has ended abnormally; CDMA only
23 - Received intercept from the base station; originating only; CDMA only
24 - Received reorder from the base station; originating only; CDMA only
25 - Received release from the base station; no reason was given
26 - Received release from the base station; SO reject; CDMA only
27 - Received incoming call from the base station
28 - Received alert stop from the base station; incoming only; CDMA only
29 - Client ended the call
30 - Received end activation; OTASP call only; CDMA only
31 - MC aborted the origination/conversation; CDMA only
32 - Maximum access probes were transmitted; CDMA only
33 - Persistence test failure; FEATURE_JCDMA only; CDMA only
34 - R-UIM is not present
35 - Access attempt is already in progress
36 - Access failure for a reason other than the above
37 - Received retry order; originating only; IS 2000; CDMA only
38 - BYBS Concurrent service is not supported by the base station
39 - No response was received from the base station
40 - Call was rejected by the base station; CDMA only
41 - Concurrent services requested were not compatible; CDMA only
42 - Access is blocked by the base station; CDMA only
43 - Corresponds to CM_CALL_ORIG_ ERR_ALREADY_IN_TC
44 - Call is ended because an emergency call is flashed over this call; CDMA only
45 - Used if CM is ending a GPS call in preference of a user call
46 - Used if CM is ending an SMS call in preference of a user call
47 - Used if CM is ending a data call in preference of an emergency call
48 - Call was rejected because of a redirection or handoff
49 - Access is blocked by the base station for all mobiles; KDDI-specific; CDMA only
50 - To support OTASP SPC Error indication
51 - Maximum access probes for an IS-707B call; CDMA only
52 - Base station reject order
53 - Base station retry order
54 - Timer T42 is expired
55 - Timer T40 is expired
56 - Service initialization failure
57 - Timer T50m is expired
58 - Timer T51m is expired
59 - Acknowledgement timeout due to 12 retransmissions
60 - Bad forward link or timer T5M is expired
61 - Transceiver Resource Manager request failed
62 - Timer T41 is expired
102 - WCDMA/GSM only; client rejected an incoming call
103 - WCDMA/GSM only; client rejected a setup indication
104 - WCDMA/GSM only; network ended the call
105 - WCDMA/GSM only
106 - GWM/WCDMA only; phone has no service
107 - 1X only; phone has no service
108 - Full service is unavailable
109 - Indicates resources are not available to handle a new MO/MT PS call

service Errors

110 - Unknown subscriber
111 - Illegal subscriber
112 - Bearer service not provisioned
113 - Tele service not provisioned
114 - Illegal equipment
115 - Call barred
116 - Illegal ss operation
117 - Ss error status
118 - Ss not available
119 - Ss subscriptiON VIOLATION
120 - Ss incompatibility
121 - Facility not supported
122 - Absent subscriber
123 - Short term denial
124 - Long term denial
125 - System failure
126 - Data missing
127 - Unexpected data value
128 - Pwd registration failure
129 - Negative pwd check
130 - Num of pwd attempts violation
131 - Position method failure
132 - Unknown alphabet
133 - Ussd busy
134 - Rejected by user
135 - Rejected by network
136 - Deflection to served subscriber
137 - Special service code
138 - Invalid deflected to number
139 - Mpty participants exceeded
140 - Resources not available

control cause values

141 - Unassigned number
142 - No route to destination
143 - Channel unacceptable
144 - Operator determined barring
145 - Normal call clearing
146 - User busy sEE [s3, aNNEX h]
147 - No user responding sEE [s3, aNNEX h]
148 - User alerting no answer
149 - Call rejected sEE [s3, aNNEX h]
150 - Number changed sEE [s3, aNNEX h]
151 - Preemption sEE [s3, aNNEX h]
152 - Destination out of order
153 - Invalid number format
154 - Facility rejected
155 - Resp to status enquiry
156 - Normal unspecified
157 - No circuit or channel available
158 - Network out of order
159 - Temporary failure
160 - Switching equipment congestion
161 - Access information discarded
162 - Requested circuit or channel not available
163 - Resources unavailable or unspecified
164 - Qos unavailable
165 - Requested facility not subscribed
166 - Incoming calls barred within cug
167 - Bearer capability not auth
168 - Bearer capability unavailable
169 - Service option not available
170 - Acm limit exceeded
171 - Bearer service not implemented
172 - Requested facility not implemented
173 - Only digital information bearer available
174 - Service or option not implemented
175 - Invalid transaction identifier
176 - USER NOT MEMBER OF CUG
177 - Incompatible destination
178 - Invalid transit nw selection
179 - Semantically incorrect message
180 - Invalid mandatory information
181 - Message type non implemented
182 - Message type not compatible with protocol statE
183 - Information element non existent
184 - Conditonal ie error
185 - Message not compatible with protocol state
186 - Recovery on timer expired
187 - Protocol error unspecified
188 - Interworking unspecified
189 - Outgoing calls barred within cug
190 - No cug selection
191 - Unknown cug index
192 - Cug index incompatible
193 - Cug call failure unspecified
194 - Clir not subscribed
195 - Ccbs possible sEE
196 - Ccbs not possible

reject causes

197 - Imsi unknown in hlr
198 - Illegal ms
199 - Imsi unknown in vlr
200 - Imei not accepted
201 - Illegal me sEE
202 - Plmn not allowed
203 - Location area not allowed
204 - Roaming not allowed in this location area
205 - No suitable cells in location area
206 - Network failure sEE
207 - mac failure sEE
208 - Synch failure
209 - Network congestion
210 - GSM authentication unacceptable
211 - Service not subscribed
212 - Service temporarily out of order
213 - Call cannot be identified
214 - Incorrect semantics in message
215 - Mandatory information invalid
216 - Call failed due to other access stratum failures
217 - SIM is invalid
218 - Invalid call state
219 - Access class is blocked
220 - No resources are in the protocol stack to allow the call
221 - Invalid user data was received

reject causes

222 - Timer T3230 is expired
223 - No cell is available
224 - Abort message was received
225 - Radio link was lost due to other lower layer causes

reject causes

226 - Timer T303 is expired
227 - CNM MM release is pending

stratum reject causes

228 - Access stratum RR release indication
229 - Access stratum random access failure
230 - RRC_REL_IND Access stratum RRC release indication
231 - Access stratum close session indication
232 - Access stratum open session failure
233 - Access stratum low level failure
234 - Access stratum low level failure redial is not allowed
235 - Access stratum low level immediate retry
236 - Access stratum abort radio is unavailable

reject causes

237 - Service option is not supported

IP end reasons

300 - Received SIP 400 bad request;waiting for INVITE response
301 - Received SIP 400 bad request;waiting for INVITE response
302 - Received SIP 404 not found; call failed; called party does not exist
303 - Received SIP 415 unsupported media type; call failed; called party does not support media
304 - Received SIP 480 temporarily unavailable; call failed; called party is not in the LTE area
305 - No network response; call failed
306 - No network response; unable to put call on hold
307 - Moved to eHRPD; call failed or dropped; not in the LTE area
308 - Upgrade/downgrade rejected (200 OK with the current call SDP)
309 - Received 403 call forbidden;waiting for INVITE response
310 - Generic timeout; did not receive a response from the server or other end
311 - Reported on the MO side for generic internal software errors; user can try again if the call still exists
312 - Reported on the MT side if the upgrade timer has been cancelled or cannot complete the request for some reason after notifying the user of a reinvite request
313 - Call origination is rejected due to a Service-Specific Access Control (SSAC) barring
314 - Phone was put in thermal emergency
315 - 1XCSFB call ended because of a soft failure
316 - 1XCSFB call ended because of a hard failure