qaGobiApiTableCallEndReasons.h File Reference
Wireless Data Service Call End Reasons.
More...
Go to the source code of this file.
Detailed Description
Wireless Data Service Call End Reasons.
- 1 - Reason unspecified
- 2 - Client ended the call
- 3 - Device has no service
- 4 - Call ended abnormally
- 5 - Received release from base station; no reason given
- 6 - Access attempt already in progress; SD2.0 only
- 7 - Access failure for reason other than the above
- 8 - Call rejected because of redirection or handoff
- 9 - Call failed because close is in progress
- 10 - Authentication failed
- 11 - Call ended because of internal call end. This error code is returned when data call is brought down due to some unknown error, such as not specific to any RAT
- 12 - Call ended because of internal error. This error code is returned when data call is brought down due to some unspecified internal error, such as NULL pointer
- 13 - Internal unknown casue code
- 500 - Device is CDMA-locked until power cycle
- 501 - Received intercept from base station; origination only
- 502 - Received reorder from base station; origination only
- 503 - Received release from base station; service option reject
- 504 - Received incoming call from base station
- 505 - Received alert stop from base station; incoming only
- 506 - Received end activation; OTASP call only
- 507 - Max access probes transmitted
- 508 - Concurrent service is not supported by base station
- 509 - No response received from base station
- 510 - Call rejected by the base station; CDMA only
- 511 - Concurrent services requested were not compatible; CDMA only
- 512 - Corresponds to CM_CALL_ORIG_ERR_ALREADY_IN_TC
- 513 - Used if Call manager subsystem is ending a GPS call in favor of a user call
- 514 - Used if Call manager subsystem is ending a SMS call in favor of a user call
- 515 - CDMA Only; Device has no service
- 1000 - Call origination request failed; WCDMA/GSM Only
- 1001 - Client rejected the incoming call; WCDMA/GSM Only
- 1002 - Device has no UMTS service; WCDMA/GSM Only
- 1003 - Network ended the call, look in cc_call; WCDMA/GSM Only
- 1004 - LLC or SNDCP failure
- 1005 - Insufficient resources
- 1006 - Service option temporarily out of order
- 1007 - NSAPI already used
- 1008 - Regular PDP context deactivation
- 1009 - Network failure, This cause is sent to the MS if the MSC cannot service an MS generated request because of PLMN failures, e.g. problems in MAP
- 1010 - Reactivation requested
- 1011 - Protocol error, unspecified
- 1012 - Operator-determined barring
- 1013 - Unknown or missing Access Point Name (APN)
- 1014 - Unknown PDP address or PDP type
- 1015 - Activation rejected by GGSN
- 1016 - Activation rejected, unspecified
- 1017 - Service option not supported
- 1018 - Requested service option not subscribed
- 1019 - Quality of Service (QoS) not accepted
- 1020 - Semantic error in the TFT operation
- 1021 - Syntactical error in the TFT operation
- 1022 - Unknown PDP context
- 1023 - Semantic errors in packet filter(s)
- 1024 - Syntactical error in packet filter(s)
- 1025 - PDP context without TFT already activated
- 1026 - Invalid transaction identifier value
- 1027 - Semantically incorrect message, This cause is used to report receipt of a message with semantically incorrect contents
- 1028 - Invalid mandatory information, This cause indicates that the equipment sending this cause has received a message with a non-semantical mandatory IE error
- 1029 - Message type non-existent or not implemented, This cause indicates that the equipment sending this cause has received a message with a message type it does not recognize either because this is a message not defined, or defined but not implemented by the equipment sending this cause.
- 1030 - Message not compatible with state, This cause indicates that the equipment sending this cause has received a message not compatible with the protocol state
- 1031 - Information element nonexistent or not implemented, This cause indicates that the equipment sending this cause has received a message which includes information elements not recognized because the information element identifier is not defined or it is defined but not implemented by the equipment sending the cause.
- 1032 - Conditional information element error, This cause indicates that the equipment sending this cause has received a message with conditional IE errors
- 1033 - Message not compatible with protocol state, This cause indicates that a message has been received which is incompatible with the protocol state or that a STATUS message has been received indicating an incompatible call state
- 1034 - APN restriction value incompatible with active PDP context
- 1035 - No GPRS context present
- 1036 - Requested feature not supported
- 1037 - Illegal MS, This cause is sent to the MS when the network refuses service to the MS either because an identity of the MS is not acceptable to the network or because the MS does not pass the authentication check, i.e. the SRES received from the MS is different from that generated by the network
- 1038 - Illegal ME, This cause is sent to the MS if the ME used is not acceptable to the network, e.g. blacklisted
- 1039 - GPRS and non GPRS services not allowed
- 1040 - GPRS services not allowed
- 1041 - MS identity not derived by the network
- 1042 - Implicitly detached, This cause is sent to the MS either if the network has implicitly detached the MS, e.g. some while after the Mobile reachable timer has expired, or if the GMM context data related to the subscription dose not exist in the SGSN e.g. because of a SGSN restart.
- 1043 - PLMN not allowed, This cause is sent to the MS if it requests location updating in a PLMN where the MS, by subscription or due to operator determined barring is not allowed to operate
- 1044 - LA not allowed, This cause is sent to the MS if it requests location updating in a location area where the HPLMN determines that the MS, by subscription, is not allowed to operate.
- 1045 - GPRS services not allowed in PLMN
- 1046 - PDP duplicate
- 1047 - UE radio access technology change
- 1048 - app preempted
- 1049 - Congestion, This cause is sent if the service request or LOCATION UPDATING REQUEST message cannot be actioned because of congestion (e.g. congestion of the MSC or SGSN or GGSN or PDN Gateway; no channel; facility busy/congested etc.).
- 1050 - No PDP context activated
- 1051 - Access class DSAC rejection
- 1500 - Abort connection setup due to the reception of a ConnectionDeny message with deny code set to either general or network busy.
- 1501 - Abort connection setup due to the reception of a ConnectionDeny message with deny code set to either billing or authentication failure.
- 1502 - Change HDR system due to redirection or PRL not preferred
- 1503 - Exit HDR due to redirection or PRL not preferred
- 1504 - No HDR session
- 1505 - Used if Call manager is ending an HDR call origination in favor of a GPS fix
- 1506 - Connection setup timeout
- 1507 - Call manager released HDR call so 1x call can continue
- 1 - Mobile IP
- 2 - Internal
- 3 - Call Manager defined
- 6 - 3GPP specification defined
- 7 - PPP
- 8 - EHRPD
- 9 - IPv6
- 64 - MIP_FA_ERR_REASON_UNSPECIFIED
- 65 - MIP_FA_ERR_ADMINISTRATIVELY_PROHIBITED
- 66 - MIP_FA_ERR_INSUFFICIENT_RESOURCES
- 67 - MIP_FA_ERR_MOBILE_NODE_AUTHENTICATION_FAILURE
- 68 - MIP_FA_ERR_HA_AUTHENTICATION_FAILURE
- 69 - MIP_FA_ERR_REQUESTED_LIFETIME_TOO_LONG
- 70 - MIP_FA_ERR_MALFORMED_REQUEST
- 71 - MIP_FA_ERR_MALFORMED_REPLY
- 72 - MIP_FA_ERR_ENCAPSULATION_UNAVAILABLE
- 73 - MIP_FA_ERR_VJHC_UNAVAILABLE
- 74 - MIP_FA_ERR_REVERSE_TUNNEL_UNAVAILABLE
- 75 - MIP_FA_ERR_REVERSE_TUNNEL_IS_MANDATORY_AND_T_BIT_NOT_SET
- 79 - MIP_FA_ERR_DELIVERY_STYLE_NOT_SUPPORTED
- 97 - MIP_FA_ERR_MISSING_NAI
- 98 - MIP_FA_ERR_MISSING_HA
- 99 - MIP_FA_ERR_MISSING_HOME_ADDR
- 104 - MIP_FA_ERR_UNKNOWN_CHALLENGE
- 105 - MIP_FA_ERR_MISSING_CHALLENGE
- 106 - MIP_FA_ERR_STALE_CHALLENGE
- 128 - MIP_HA_ERR_REASON_UNSPECIFIED
- 129 - MIP_HA_ERR_ADMINISTRATIVELY_PROHIBITED
- 130 - MIP_HA_ERR_INSUFFICIENT_RESOURCES
- 131 - MIP_HA_ERR_MOBILE_NODE_AUTHENTICATION_FAILURE
- 132 - MIP_HA_ERR_FA_AUTHENTICATION_FAILURE
- 133 - MIP_HA_ERR_REGISTRATION_ID_MISMATCH
- 134 - MIP_HA_ERR_MALFORMED_REQUEST
- 136 - MIP_HA_ERR_UNKNOWN_HA_ADDR
- 137 - MIP_HA_ERR_REVERSE_TUNNEL_UNAVAILABLE
- 138 - MIP_HA_ERR_REVERSE_TUNNEL_IS_MANDATORY_AND_T_BIT_NOT_SET
- 139 - MIP_HA_ERR_ENCAPSULATION_UNAVAILABLE
- 65536 - MIP_ERR_REASON_UNKNOWN
- 200 - INTERNAL_MIN, internal error table offset value, no meaningful message to the error.
- 201 - INTERNAL_ERROR
- 202 - CALL_ENDED
- 203 - INTERNAL_UNKNOWN_CAUSE_CODE
- 204 - UNKNOWN_CAUSE_CODE
- 205 - CLOSE_IN_PROGRESS
- 206 - NW_INITIATED_TERMINATION
- 207 - APP_PREEMPTED
- 208 - ERR_PDN_IPV4_CALL_DISALLOWED
- 209 - ERR_PDN_IPV4_CALL_THROTTLED
- 210 - ERR_PDN_IPV6_CALL_DISALLOWED
- 211 - ERR_PDN_IPV6_CALL_THROTTLED
- 212 - MODEM_RESTART
- 213 - PDP_PPP_NOT_SUPPORTED
- 214 - UNPREFERRED_RAT
- 215 - PHYS_LINK_CLOSE_IN_PROGRESS
- 216 - APN_PENDING_HANDOVER
- 217 - PROFILE_BEARER_INCOMPATIBLE
- 218 - MMGSDI_CARD_EVT
- 219 - LPM_OR_PWR_DOWN
- 220 - APN_DISABLED
- 221 - MPIT_EXPIRED
- 222 - IPV6_ADDR_TRANSFER_FAILED
- 223 - TRAT_SWAP_FAILED
- 500 - CDMA_LOCK
- 501 - INTERCEPT
- 502 - REORDER
- 503 - REL_SO_REJ
- 504 - INCOM_CALL
- 505 - ALERT_STOP
- 506 - ACTIVATION
- 507 - MAX_ACCESS_PROBE
- 508 - CCS_NOT_SUPPORTED_BY_BS
- 509 - NO_RESPONSE_FROM_BS
- 510 - REJECTED_BY_BS
- 511 - INCOMPATIBLE
- 512 - ALREADY_IN_TC
- 513 - USER_CAL_ORIG_DURING_GPS
- 514 - USER_CAL_ORIG_DURING_SMS
- 515 - NO_CDMA_SRV
- 516 - MC_ABORT
- 517 - PSIST_NG
- 518 - UIM_NOT_PRESENT
- 519 - RETRY_ORDER
- 520 - ACCESS_BLOCK
- 521 - ACCESS_BLOCK_ALL
- 522 - IS707B_MAX_ACC
- 523 - THERMAL_EMERGENCY
- 524 - CALL_ORIG_THROTTLED
- 525 - USER CALL ORIGINATE DURING VOICE CALL
- 1000 - CONF_FAILED
- 1001 - INCOM_REJ
- 1002 - NO_GW_SRV
- 1003 - NO_GPRS_CONTEXT
- 1004 - ILLEGAL_MS, This cause is sent to the MS when the network refuses service to the MS either because an identity of the MS is not acceptable to the network or because the MS does not pass the authentication check, i.e. the SRES received from the MS is different from that generated by the network
- 1005 - ILLEGAL_ME, This cause is sent to the MS if the ME used is not acceptable to the network, e.g. blacklisted
- 1006 - GPRS_SERVICES_AND_NON_GPRS_SERVICES_NOT_ALLOWED
- 1007 - GPRS_SERVICES_NOT_ALLOWED
- 1008 - MS_IDENTITY_CANNOT_BE_DERVIVED_BY_THE_NETWORK
- 1009 - IMPLICITLY_DETACHED
- 1010 - PLMN_NOT_ALLOWED
- 1011 - LA_NOT_ALLOWED
- 1012 - GPRS_SERVICES_NOT_ALLOWED_IN_THIS_PLMN
- 1013 - PDP_DUPLICATE
- 1014 - UE_RAT_CHANGE
- 1015 - CONGESTION
- 1016 - NO_PDP_CONEXT_ACTIVATED
- 1017 - ACCESS_CLASS_DSAC_REJECTION
- 1018 - PDP_ACTIVATE_MAX_RETRY_FAILED
- 1019 - RAB_FAILURE
- 1020 - EPS_SERVICE_NOT_ALLOWED
- 1021 - TRACKING_AREA_NOT_ALLOWED
- 1022 - ROAMING_NOT_ALLOWED_IN_THIS_TRACKING_AREA
- 1023 - NO_SUITABLE_CELLS_IN_TRACKING_AREA
- 1024 - NOT_AUTHORIZED_FOR_THIS_CLOSED_SUBSCRIBER_GROUP
- 1025 - ESM_UNKNOWN_EPS_BEARER_CONTEXT
- 1026 - DRB_RELEASED_AT_RRC
- 1027 - NAS_SIG_CONN_RELEASED
- 1028 - EPS_MOBILITY_MANAGEMENT_DETACHED
- 1029 - EPS_MOBILITY_MANAGEMENT_ATTACH_FAILED
- 1030 - EPS_MOBILITY_MANAGEMENT_ATTACH_STARTED
- 1031 - LTE_NAS_SERVICE_REQ_FAILED
- 1032 - ESM_ACTIVE_DEDICATED_BEARER_REACTIVATED_BY_NW
- 1033 - ESM_LOWER_LAYER_FAILURE
- 1034 - ESM_SYNC_UP_WITH_NW
- 1035 - ESM_NW_ACTIVATED_DED_BEARER_WITH_ID_OF_DEF_BEARER
- 1036 - ESM_BAD_OTA_MESSAGE
- 1037 - ESM_DS_REJECTED_THE_CALL
- 1038 - ESM_CONTEXT_TRANSFERED_DUE_TO_IRAT
- 1039 - DS_EXPLICIT_DEACT
- 1040 - ESM_LOCAL_CAUSE_NONE
- 1041 - LTE_NAS_SERVICE_REQ_FAILED_NO_THROTTLE
- 1042 - ACL_FAILURE, This error code should rarely triggered and reported to the application
- 1043 - LTE_NAS_SERVICE_REQ_FAILED_DS_DISALLOW
- 1044 - EMM_T3417_EXPIRED
- 1045 - EMM_T3417_EXT_EXPIRED
- 1046 - LRRC_UL_DATA_CNF_FAILURE_TXN - Light Radio Resource Controller Uplink data confirmation failure
- 1047 - LRRC_UL_DATA_CNF_FAILURE_HO
- 1048 - LRRC_UL_DATA_CNF_FAILURE_CONN_REL
- 1049 - LRRC_UL_DATA_CNF_FAILURE_RLF
- 1050 - LRRC_UL_DATA_CNF_FAILURE_CTRL_NOT_CONN
- 1051 - LRRC_CONN_EST_FAILURE
- 1052 - LRRC_CONN_EST_FAILURE_ABORTED
- 1053 - LRRC_CONN_EST_FAILURE_ACCESS_BARRED
- 1054 - LRRC_CONN_EST_FAILURE_CELL_RESEL
- 1055 - LRRC_CONN_EST_FAILURE_CONFIG_FAILURE
- 1056 - LRRC_CONN_EST_FAILURE_TIMER_EXPIRED
- 1057 - LRRC_CONN_EST_FAILURE_LINK_FAILUR
- 1058 - LRRC_CONN_EST_FAILURE_NOT_CAMPED
- 1059 - LRRC_CONN_EST_FAILURE_SI_FAILURE
- 1060 - LRRC_CONN_EST_FAILURE_CONN_REJECT
- 1061 - LRRC_CONN_REL_NORMAL
- 1062 - LRRC_CONN_REL_RLF
- 1063 - LRRC_CONN_REL_CRE_FAILURE
- 1064 - LRRC_CONN_REL_OOS_DURING_CRE
- 1065 - LRRC_CONN_REL_ABORTED
- 1066 - LRRC_CONN_REL_SIB_READ_ERROR
- 1067 - DETACH_WITH_REATTACH_LTE_NW_DETACH
- 1068 - DETACH_WITH_OUT_REATTACH_LTE_NW_DETACH
- 1069 - ESM_PROC_TIME_OUT
- 1070 - MESSAGE_EXCEED_MAX_L2_LIMIT
- 1500 - CD_GEN_OR_BUSY
- 1501 - CD_BILL_OR_AUTH
- 1502 - CHG_HDR
- 1503 - EXIT_HDR
- 1504 - HDR_NO_SESSION
- 1505 - HDR_ORIG_DURING_GPS_FIX
- 1506 - HDR_CS_TIMEOUT
- 1507 - HDR_RELEASED_BY_CM
- 1508 - COLLOC_ACQ_FAIL
- 1509 - OTASP_COMMIT_IN_PROG
- 1510 - NO_HYBR_HDR_SRV
- 1511 - HDR_NO_LOCK_GRANTED
- 1512 - HOLD_OTHER_IN_PROG
- 1513 - HDR_FADE
- 1514 - HDR_ACC_FAIL
- 2000 - CLIENT_END
- 2001 - NO_SRV
- 2002 - FADE
- 2003 - REL_NORMAL
- 2004 - ACC_IN_PROG
- 2005 - ACC_FAIL
- 2006 - REDIR_OR_HANDOFF
- 2500 - OFFLINE
- 2501 - EMERGENCY_MODE
- 2502 - PHONE_IN_USE
- 2503 - INVALID_MODE
- 2504 - INVALID_SIM_STATE
- 2505 - NO_COLLOC_HDR
- 2506 - CALL_CONTROL_REJECTED
- 8 - OPERATOR_DETERMINED_BARRING
- 25 - LLC_SNDCP_FAILURE, PDP context deactivation initiated by the MS or by the Network
- 26 - INSUFFICIENT_RESOURCES, PDP context deactivation initiated by the MS
- 27 - UNKNOWN_APN, Unsuccessful MBMS context activation requested by the MS
- 28 - UNKNOWN_PDP
- 29 - AUTH_FAILED, Unsuccessful MBMS context activation requested by the MS
- 30 - GGSN_REJECT, Unsuccessful MBMS context activation requested by the MS
- 31 - ACTIVATION_REJECT, Unsuccessful MBMS context activation requested by the MS
- 32 - OPTION_NOT_SUPPORTED
- 33 - OPTION_UNSUBSCRIBED, This cause is sent when the MS requests a service option for which it has no subscription
- 34 - OPTION_TEMP_OOO, service option temporarily out of order
- 35 - NSAPI_ALREADY_USED
- 36 - REGULAR_DEACTIVATION
- 37 - QOS_NOT_ACCEPTED
- 38 - NETWORK_FAILURE, This cause is sent to the MS if the MSC cannot service an MS generated request because of PLMN failures, e.g. problems in MAP
- 39 - UMTS_REACTIVATION_REQ
- 40 - FEATURE_NOT_SUPPORTED, Unsuccessful MBMS context activation requested by the network
- 41 - TFT_SEMANTIC_ERROR
- 42 - TFT_SYNTAX_ERROR
- 43 - UNKNOWN_PDP_CONTEXT
- 44 - FILTER_SEMANTIC_ERROR
- 45 - FILTER_SYNTAX_ERROR
- 46 - PDP_WITHOUT_ACTIVE_TFT
- 50 - IPV4 ONLY ALLOWED
- 51 - IPV6 ONLY ALLOWED
- 52 - SINGLE ADDRESS BEARER ONLY
- 53 - ESM INFORMATION NOT RECEIVED
- 54 - PND CONNECTION DOES NOT EXIST
- 55 - MULTIPLE CONNECTION TO SAME PDN NOT ALLOWED
- 81 - INVALID_TRANSACTION_ID
- 95 - MESSAGE_INCORRECT_SEMANTIC
- 96 - INVALID_MANDATORY_INFO
- 97 - MESSAGE_TYPE_UNSUPPORTED
- 98 - MSG_TYPE_NONCOMPATIBLE_STATE
- 99 - UNKNOWN_INFO_ELEMENT
- 100 - CONDITIONAL_IE_ERROR
- 101 - MSG_AND_PROTOCOL_STATE_UNCOMPATIBLE
- 111 - PROTOCOL_ERROR
- 112 - APN_TYPE_CONFLICT
- 113 - INVALID PROXY-CALL SESSION CONTROL FUNCTION ADDRESS
- 1 - TIMEOUT
- 2 - AUTH_FAILURE
- 3 - OPTION_MISMATCH
- 31 - PAP_FAILURE
- 32 - CHAP_FAILURE
- 33 - CLOSE_IN_PROGRESS
- -1 - UNKNOWN
- 1 - SUBS_LIMITED_TO_V4
- 2 - SUBS_LIMITED_TO_V6
- 4 - VSNCP_TIMEOUT
- 5 - VSNCP_FAILURE
- 6 - VSNCP_3GPP2I_GEN_ERROR
- 7 - VSNCP_3GPP2I_UNAUTH_APN
- 8 - VSNCP_3GPP2I_PDN_LIMIT_EXCEED
- 9 - VSNCP_3GPP2I_NO_PDN_GW
- 10 - VSNCP_3GPP2I_PDN_GW_UNREACH
- 11 - VSNCP_3GPP2I_PDN_GW_REJ
- 12 - VSNCP_3GPP2I_INSUFF_PARAM
- 13 - VSNCP_3GPP2I_RESOURCE_UNAVAIL
- 14 - VSNCP_3GPP2I_ADMIN_PROHIBIT
- 15 - VSNCP_3GPP2I_PDN_ID_IN_USE
- 16 - VSNCP_3GPP2I_SUBSCR_LIMITATION
- 17 - VSNCP_3GPP2I_PDN_EXISTS_FOR_THIS_APN
- 1 - PREFIX_UNAVAILABLE
- 2 - IPV6_ERR_HRPD_IPV6_DISABLED
Copyright: © 2011-2013 Sierra Wireless, Inc. all rights reserved